User Instructions

10
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
• To turn the appliance o, press the button (g. 8).
• The message “Turning o, Please wait” is displayed: if fea-
tured, the appliance completes a rinse cycle and then goes
o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button
(g. 8);
• release the main switch at the back of the appliance (g.
2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
When you access the settings menu by pressing the MENU/ESC
button, scroll the menu items by pressing or (g. 9).
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press
or (g. 9) until “Rinsing” is displayed;
3. Press the OK button (g. 3): “Conrm?” will be disp
layed.
4. Press the OK button: after a few seconds, hot water ows
out of the spout, heating the internal circuit and making
the coee delivered hotter.
Please note!
Press any button to stop hot water delivery at any time.
Descaling
For instructions on descaling, see page 17.
Install lter
For instructions on how to install the lter, see the section
“Water softener lter” (page 18).
Replacing the lter (if installed)
For instructions on how to replace the lter, see the section “Re-
placing the lter” (page 19).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press
or (g. 9) until “Adjust time” is displayed;
3. Press the OK button (g. 3): le ore lampeggiano;
4. Press
or the hours ash;
5. Press the OK button to conrm: the minutes ash;
6. Press
or to change the minutes;
7. Press the OK button to conrm.
This sets the time. Press the MENU/ESC button to exit the menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly.
To enable auto-start, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press or (g. 9) until “Auto-start” is displayed;
3. Press the OK button (g. 3): “Enable?” is displayed;
4. Press the OK button to conrm;
5. Press or to choose the hours;
6. Press the OK button to conrm;
7. Press or to change the minutes;
8. Press the OK button to conrm;
9. Then press the MENU/ESC button to exit the menu.
Once the time has been conrmed, activation of auto-start is
indicated by the symbol displayed alongside the time.
To disable the function:
1. Select auto-start from the menu;
2. Press the OK button: “Disable?” is displayed;
3. Press the OK button to conrm.
The symbol is no longer displayed .
Auto-O (standby)
Auto-o mode can be set, so that the appliance switches o
when not used for 15 or 30 minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press or (g. 9) until “Auto-o” is displayed;
3. Press the OK button (g. 3);
4. Press or until the required operating time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Then press the MENU/ESC button to exit the menu.
Auto-o is programmed.