Instructions

30
Light Meaning
The grounds container
needs emptying
The grounds container is
missing or not inserted
correctly: Insert the drip
tray complete with grounds
container and press as far as
it will go
→
Light Meaning
Descaling is required (“14.
Descaling
” and the ded-
icated section of the Quick
Guide)
Descaling has been inter-
rupted. To use the machine
again, press the
BUTTON: delivery will
begin and descaling will re-
sume from Fig. 15, page 13
of the quick guide.
16. TROUBLESHOOTING
Below is a list of some possible malfunctions.
If the problem cannot be resolved as described, contact customer services.
PROBLEM POSSIBLE CAUSE REMEDY
The appliance does not come on. It is not plugged into the mains socket. Plug into the mains socket.
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot
water function).
The internal circuits of the appliance have
cooled down because 2-3 minutes have
elapsed since the last coee was made.
Before making coee, press and hold the
button for a few seconds to perform a
rinse cycle and warm the internal circuits.
Coee temperature setting too low. Set a hotter coee temperature in the set-
tings menu (see “10. Settings menu”).
The machine must be descaled Carry out the descale procedure. Next,
check the water hardness (“7. Measuring
water hardness”) and make certain the
machine setting matches the local water
supply hardness (“10. Settings menu”).
The coee is weak or not creamy enough. The coee is ground too coarsely. Adjust the grinding level (“4.6 Adjusting
the coee mill”). The eect is not visible
until at least 2 coees have been made.
The coee is unsuitable. Use coee for espresso machines.
Coee not fresh. The coee pack has been opened for too
long and has lost its taste.
→