Instruction Manual

14
13.5 Cleaning the boiler
outlet
After every 200 coees, rinse
the boiler outlet. Press the
rinse button (B4) and
deliver about 200 ml/ 6.76 
oz of water.
13.6 Cleaning the water
tank
1. Remove the lter (*if
present) and rinse with
running water.
2. Clean the water tank regularly (about once a month) and when-
ever you replace the water softener lter (C6) (*if present) with
a damp cloth and a little mild washing up liquid, then rinse
thoroughly.
3. Replace the lter (*if present), ll the tank with fresh water
and replace the tank.
4. (Models with water softener lter only) Deliver about 100
ml/ 3.4  oz of water.
Danger!
While cleaning, never immerse the coee maker in water. It is an
electrical appliance.
13.7 Cleaning the bean container
Without extracting it, clean the bean container regularly with
a cloth.
For more thorough cleaning, proceed as follows:
1. Make sure the bean container (A2) is empty. If necessary,
operate the coee mill without beans to empty it:
2. Release the bean container by turning it counterclockwise
and extract from the appliance.
3. Wash the container and
lid (A1) with warm water.
Do not wash the compo-
nents in a dishwater or
use washing up liquid! Dry
all accessories thoroughly
before using again.
4. Remove coee residues
(g. 41);
5. Clean the bean contain-
er housing with a damp
cloth and dry;
6. Put the container back as described in section "3. Setting
up the appliance".
13.8 Cleaning the burrs
When cleaning the bean container, clean the container housing
and upper burr with a damp cloth. The burr can be removed and re-
placed when worn. Contact an authorised customer services centre.
You may also need to remove the burr if it becomes blocked with
foreign matter. If this occurs, clean as follows:
1. Empty the bean container (if necessary, using a vacuum
cleaner to remove any remaining beans).
2. Attach the portalter and operate the grinder without
beans to free the coee guide, then attach the portalter
to the outlet of the coee grinder (A22), lining it up with
"INSERT", then turning it to the right (g. 18). Grinding be-
gins when the portalter reaches the CLOSE position and
stops automatically;
3. Turn the appliance o;
4. Remove the bean container as described in the previous
section "13.7 Cleaning the bean container".
19
1942 43
5. Turn the neness selector counterclockwise as far as it will
go to the "REMOVE" position (g. 42).
6. Extract the upper burr,
gripping it by the handle
(g. 43).
7. Clean the burr with a
brush (g. 44) and remove
the coee residues using a
vacuum cleaner (g. 41).
8. Put the upper burr back in place:
41
44
40