Instruction Manual

10
Always check that there is the right amount of coee in the lter
(see section "4.4 Adjusting the quantity of ground coee in the
lter").
COFFEE
Beverage of European origin, a long coee with a delicate
aroma.
Coee Pre-
infusion
Quantity Filter
1 cup
2.4  oz /
70 ml
C3
C2
2 cups
4.7  oz /
140 ml
C3
C2
Always check that there is the right amount of coee in the lter
(see section "4.4 Adjusting the quantity of ground coee in the
lter").
AMERICANO
Beverage of American origin, a long coee. Made by deliv-
ering an espresso, followed by hot water added directly to
the cup. Only one cup can be made at a time.
Coee Pre-
infusion
Quantity Filter
1 cup
4.1  oz /
120 ml
C3
C2
RECOMMENDED:
1 cup
8.1  oz /
240 ml
C3
C2
Always check that there is the right amount of coee in the lter
(see section "4.4 Adjusting the quantity of ground coee in the
lter").
6. CUSTOMISING THE VOLUME OF COFFEE
BEVERAGES WITH THE
BUTTON B7
1. Prepare the appliance to deliver 1 or 2 cups of the coee
beverage you want to make, as far as attaching the porta-
lter (C1) complete with the (C2) or (C3) lter and ground
coee.
2. Turn the dial (B8) to select the coee to be programmed.
3. Press the button: the light corresponding to the "OK"
button (B5) comes on steadily and the light corresponding
to the
button ashes.
4. Press the "OK" button to start delivering the beverage. The
lights corresponding to the "OK" and
buttons ash.
5. When you have reached the desired quantity of the bever-
age, press the "OK" button again.
6. Press the button to save the new setting. The appliance
is ready for use again and the
button remains on.
If you do not want to save the new setting, press any other
button.
Programming Americano coee: follow the procedure described
above for the quantities of both coee and hot water.
Please note:
You can programme coee beverages, but not steam and hot water.
Programming changes the quantity of the beverages, but not the amount of
coee ground.
"X2” beverages can be programmed separately.
6.1 Beverage reset
To reset the default beverage quantities, press and hold the
button (B7) until it goes o.
The selected beverage is reset to the default values.
7. USING PREGROUND COFFEE
1. Place the ground coee lter (C2) or (C3) in the portalter
(C1) (g. 17);
2. Place the quantity of ground coee in the lter;
3. Turn the dial (B2) to the position to disable the coee
mill;
4. Attach the portalter to the outlet of the coee mill (A22),
aligning it with "INSERT", then turning it to the right (g.
10).
5. Pull the tamping lever (A23) as far as it will go. The
printing on the lever indicates the tamping force exerted
( ) (g. 19).
6. Remove the portalter by turning it towards the left.
8. DELIVERING HOT WATER
1. Choose the cup and place it on the correct cup grille ((A10)
or (A11)).
2. Press the
button (B6): the appliance delivers hot
water from the spout (A5) then goes o automatically.
3. To interrupt delivery, press the
button again.
9. HOW TO MAKE MILKBASED BEVERAGES
1. Pour the quantity of milk you want to heat/froth into the
milk jug (C9), remembering that the volume of milk dou-
bles or triples in volume. For a denser more even froth, you