instr uctions Coffee Maker EC710 Please retain instructions for future reference
ON/OFF button Coffee/hot water button Steam button ON/OFF button indicator light Preheating completed indicator light Steam selected indicator light Cup rail Cup warmer plate Steam knob Water level indicator Coffee filter with crema enhancer Power cable Coffee filter holder Water tank Steam tube Cappuccino maker Coffee tamper Cup grid Boiler outlet Drip tray Pod filter Coffee Maker Pod filter holder Measure 2
Thank you for choosing this coffee machine. To get the very best out of your new coffee machine it is advisable to read these instructions before using the appliance. This is the only way to ensure optimum results and maximum safety. Using for the first time Before using the machine for the first time, wash all the accessories in warm soapy water and rinse. For the best tasting coffee the internal circuits must be flushed through at least five times.
How to prepare espresso coffee Filling the water tank Remove the tank by pulling sideways and lifting the intake tubes out of the water (fig. 1). Rinse and fill with clean cold water (fig 2).The water level is shown by a floating ball. Replace the tank in the housing, making sure the tubes are in the water. More simply, fill the tank by extracting it just enough to pour in the water directly from a jug.
How to prepare espresso coffee using the filter holder for ground coffee 1. After preheating the appliance, the machine is ready to be used. Insert the ground coffee filter with crema enhancer into the filter holder, making sure the tab is correctly inserted into the housing as shown in fig. 7. 2. To prepare a single coffee, fill the filter with a level measure of ground coffee, about 7 g (fig. 8).
How to prepare coffee using the filter holder for pods (depending upon model) 1. Preheat the machine as described in the ‘Preheating the Coffee Machine’ section, attaching the pod filter holder to the unit.This procedure ensures that the coffee is delivered at a hotter temperature and that the seal of the holder is more effective. 2. Remove the pod filter holder and tip any excess water away. Press the filter holder button and insert the pod into the filter (fig 13). fig.
How to make cappuccino 1. Prepare espresso coffee, using cups that are large enough for cappuccinos 2. Press the steam button (fig. 17) and wait for the steam indicator light to come on (fig. 18).The OK indicator light indicates that the boiler has reached the ideal temperature for steam production. 3.In the meantime, fill a container with about 100 grams of milk for each cappuccino to be prepared. Ideally use a small stainless steel jug. The milk must be at refrigerator temperature (not hot!).
2. With one hand, hold the cappuccino tube firmly and with the other unscrew the cappuccino maker itself by rotating clockwise and extracting downwards (fig. 23). 3. Remove the nozzle from the steam tube by pulling it downwards (fig. 24). Note: Metal of steam pipe may be hot!!! 4. Wash the cappuccino maker and steam nozzle thoroughly with warm water. 5. Make sure the two holes indicated by the arrows in fig. 25 are not blocked. If necessary, clean with a pin. 6.
Cleaning and maintenance Before performing any cleaning or maintenance operations, turn the machine off, unplug it from the power socket and allow it to cool down. 1. Do not use solvents or detergents when cleaning the coffee maker. A soft, damp cloth is sufficient. 2. Remove the filter-trays, empty them and wash them periodically. ATTENTION: during cleaning, never immerse the unit in water – it is an electrical appliance. fig.
Cleaning the pod filter holder (if fitted) About every 200 coffees, clean the pod filter holder as follows: • Push the filter holder button and remove the filter (fig. 33). Clean the inside of the filter holder. Never wash in a dishwasher. • Clean the filter thoroughly in hot water using a brush. Make sure the holes in the metal filter are not blocked. If necessary, clean with a pin (see fig. 30). • Replace the filter. Failure to clean as described above invalidates the guarantee.
Problem solving PROBLEM POSSIBLE CAUSES SOLUTION The espresso coffee is cold. • The ‘OK’ pilot light was not on when the coffee delivery switch was pressed. The preheating was not carried out. • Wait until the OK pilot light comes on. • • The cups were not preheated. • Carry out the preheating as indicated in the “Preheating the coffee unit” section. Preheat the cups by rinsing them in hot water or placing them to preheat on the top plate for at least 15-20 minutes.
PROBLEM POSSIBLE CAUSES SOLUTION The coffee crema is dark (the coffee comes out slowly from the spout). • The ground coffee is too tightly pressed. The quantity of ground coffee is too much. The espresso boiler outlet is blocked. • Press the coffee less. • • The coffee is too finely ground. • Decrease the quantity of ground coffee. Clean the outlet as described in “Cleaning the espresso boiler outlet” section. Only use coffee specifically ground for espresso coffee machines.
Safety Warnings • This appliance is designed to make coffee. Please be careful to avoid burns from the sprays of hot water or steam and avoid any improper use. • When the appliance is in use, do not touch any of the machine’s hot surfaces. • After unpacking, make sure that the machine is complete and undamaged. In case of doubt, do not use the appliance and seek the advice of a qualified service professional. • Packaging materials (plastic bags, foam polystyrene, etc.
Green and Yellow to Earth 13 amp Fuse Brown to Live Blue to Neutral Cord Clamp Electrical requirements Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.
5732135300/01.
