Technical data

13
Short
≃40
Standard
≃60
Long
≃90
Extra long
≃120
Customising the “My coee” quantity
The appliance is set by default to automatically
deliver 30 ml of “My coee”. To modify this
quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 9).
2. Press the icon repeatedly (g. 8) until “My
coee” is displayed.
3. Press the 1 cup icon (g. 10). The appliance starts
making the coee;
4. Press the PROG icon. The appliance starts programming;
5. As soon as the coee in the cup reaches the required level,
press the STOP or icon again.
The quantity set has now been programmed.
Please note :
• Youcanprogrammeasinglecupofcoeeonly.
• To cancel programming of “My coee”, press the EXIT
PROG icon.
Please note!
“My coee” can be customised in all proles (see
“Memorising your personal prole” on page 17).
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that
delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment dial
(g. 11).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
For fuller bodied creamier coee, turn
one click anticlockwise towards “1”
(ner ground coee).
For faster delivery (not a drop at a time),
turn one click clockwise towards “7”
(coarser ground coee).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If delivery is still too fast or too slow, repeat the correction,
turning the dial another click.
Tips for a hotter coee
For hotter coee, you should:
• performarinsecyclebeforedeliveringthecoee,using
the “Rinsing” function in the menu;
• if Energy Saving is disabled, placethe cups on the cup
warmer until they are warm;
• warmthecupsbyrinsingthemwithhotwater(usingthe
hot water function);
• setahighercoeetemperatureinthemenu.
Making espresso coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 12).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 9);
- 2 cups, if you want 2 coees (g. 13).
3. Lower the spout as near as possible to the cup. This makes
a creamier coee (g. 14).
4. Press the icon corresponding to the number of coees
required (one cup or two cups ) (g. 10
and 15).
5. The appliance starts making coee. An image
corresponding to the type of preparation chosen is
displayed together with a progress bar which lls as
preparation proceeds.
Once the coee has been made, the appliance prepares for use
again.
Please note:
• While the appliance is making coee, delivery can be
interrupted at any moment by pressing the STOP icon or
one of the coee icons ( or ).
• Attheendofdelivery,toincreasethequantityofcoee
in the cup, just press one of the coee icons ( or
) within 3 seconds.
Important!
If the coee is delivered a drop at a time, too fast and not creamy
enough or too cold, read the tips in the “Troubleshooting”
section on page 24).
Various alarm messages could be displayed while using the
machine. Their meaning is explained in the section “Displayed
messages” (page 22).
Making espresso coee using pre-ground coee
Important!
• Neveraddpre-groundcoeewhenthemachineisoorit