Instruction Manual

MODE SELECTION
1) Plug the appliance into a mains socket.
2) "- -" is displayed to indicate that the appliance
is in standby and therefore ready for opera-
tion.
If is displayed, empty the tank or posi-
tion it correctly.
3) Press the ON/Standby button.
Dehumidifying mode
Press the "MODE" button and choose dehumidif-
ying mode.
" " and the level of relative humidity previously
set are displayed.
Press the "+" or "-" button to set the desired humi-
dity (30% means a dry environment, 80% a
humid environment).
Press the " " button to modify fan speed
(MIN/MAX).
When MAX speed is selected, the appliance ope-
rates at maximum dehumidifying power.
When MIN speed is selected, the appliance opera-
tes at low power and the noise will also be less.
Press the button to display room temperatu-
re (" " symbol) and the relative humidity
(" ") in the room in sequence.
When the appliance reaches the set level of humi-
dity it will stop and the fan will come on at regular
intervals to maintain a correct relative humidity
reading.
As soon as the humidity increases above the set
point, the appliance will automatically resume
dehumidification operation.
Dry mode
In Dry mode, the appliance operates constantly at
maximum power.
This mode is useful to dehumidify the room
rapidly.
Press the MODE button and choose Dry mode (
symbol on).
Relative humidity and fan speed cannot be set.
Smart mode
This dehumidifies automatically.
According to room conditions, the appliance auto-
matically establishes the optimum settings for
maximum comfort.
Press the MODE button and choose Smart mode.
The " " symbol appears on the display.
Relative humidity and fan speed cannot be set.
Fan mode
Press the "MODE" button and choose fan mode
(" " is displayed).
Press the " " button to select the required fan
speed (MIN/MAX).
15
GB