Instruction Manual

14
Description of buttons
ON/Standby" button
ON/Standby" button
"MODE" button
Selects the operating modes: dehumidifying, dry,
smart and fan
"Fan" button
Selects fan speed
Hygrometer/thermometer button
Temporarily displays the temperature and humi-
dity measured in the room by the appliance.
N.B.: the measurements displayed are indicative
only.
Humidity increase/decrease buttons
Adjusts the percentage of humidity present in the
room, increasing it or reducing it by steps of 5%.
Display
Meaning of the codes or symbols which may be
displayed:
- -
Indicates that the appliance is in standby
mode.
Indicates that the tank is full, absent or
positioned incorrectly.
Indicates that the appliance is operating at
low temperatures. In this situation, venti-
lation cycles are alternated with dehumi-
dification cycles to avoid the formation of
ice. For use in particularly cold environ-
ments, you are recommended to heat the
room to raise the ambient temperature
even minimally. This allows the dehumi-
difier to operate in conditions that impro-
ve its performance and accelerate the
dehumidifying process.
Indicates that there may be a fault with the
probes, or that the humidity in the room is
too low to be measured.
Display
Pulsante Fan
Pulsante
decremento umidità
Pulsante
incremento umidità
Pulsante
termometro/igrometro
Pulsante ON/Stand by Pulsante MODE
HOW TO DEHUMIDIFY
Decrease humidity
button
Fan button
Display
Increase humidity
button
Hygrometer/
thermometer button
ON/Standby button
MODE button