Specifications

- 2 -
The dehumidification capacity is the value obtained after the dehumidifier was continuously run in the
room temperature of 30
with the relative humidity 80%.
The amount of dehumidification is the amount per day(24 hours).
The manufacturer reserves the right to change specifications without prior notification.
The work temperature is in the range 2 to 38 . If the room temperature is beyond the range, the unit
can not operate normally.
If you pour cold water into a cup, the air around the cup is cooled, and drops of water
form on the surface of the cup. The dehumidifier takes advantage of this phenomenon to
remove moisture.
It draws in room air, cools it with a cooling unit,
and changes the humidity to drops of water.
The drops of water fall into a drainage tank.
The dehumidified air is re-heated by a heating
unit and discharged.
Steps
, ,and are repeated to remove
humidity from the room.
After the air passes through the re-heating unit, its temperature will rise a little, so that the
temperature of the room will rise by 2 to 4
. This is normal operation.
How dehumidifying works
Specifications
Power Supply
Dehumidifying Capacity
Power Consumption
Drainage Tank Capacity
Weight
Dimension(height
width depth)
Model CF08E
220 240V ~ 50Hz
6.0L
20L/day
400W
14kg
545mm
380mm 261.5mm
Cooling unit
Re-heating unit
Moist air
Dried air
Compressor
Drainage tank