Specifications

- 10 -
If a condition listed below occurs, please check the following items before seeking advice.
Condition
Cau
s
e
What to do
The unit does not
operate.
Ha
s the power supply cord been
disconnected?
Is the “Full” light blinking?(The
t a n k i s f u l l o r i n correctly
positioned.)
Plu
g
the power supply cord into the
outlet.
Refer to page 5
Discar
d
the water in the drainage
tank, and then reposition the tank.
Refer to page 6.
The protection device has activated.
Please
wait for the room temperature
to
be with in these limits.
Is the temperature of the room
above 38
or below 2 .
Th
e dehumidifying
functio
n does not
work
No air is discha
rged
Operation
is noisy.
Is the air filter clogged?
Is
the air inlet or outlet obstructed?
Clea
n the air filter as instructed
under
“Caring for the dehumidifier”.
Refer to page 8.
Remove
what ever is obstructing the
air inlet or outlet.
Is the air filter clogged?
Is the louver open?
Check to see if opened
Is the unit sitting on an angle or
unsteady?
Is the air filter clogged?
Clea
n the air filter as instructed
under
“Caring for the dehumidifier”.
Refer to page 8.
Mo
ve the unit to a more stable
location.
Clea
n
the air filter as instructed
under
“Caring for the dehumidifier”.
Refer to page 8.
After following the steps above ,and the fault persists,please contact De’Longhi Ltd for service:
Australia: 1800 126 659
New
Zealand:0508 200 300
Maintenance
Troubleshooting