User Manual

6
Operation and use
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (G) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-BY.
- Press the ON/OFF button (A) to turn on the appliance. It
will begin to heat with the predened settings.
- Press the MODE button (F) to select one of the following
functions available:
l
Ventilation
In this operating mode only the fan operates, so the
appliance does not heat the room.
l
Anti-freeze
In this operating mode the appliance keeps the room
at a temperature of 45°F (7°C) to prevent freezing
temperatures.
l
Heating 1 and Heating 2
In this operating mode you can set the desired
temperature by pressing the + and - adjustment
buttons (B).
- Heating 1 (minimum power level):
The appliance operates at the minimum power, reducing
noise and energy consumption to the minimum.
- Heating 2 (maximum power level):
The appliance operates at the maximum power for rapid
heating of the room.
ECO PLUS function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption.
In this operating mode the unit may switch the heating
power level from maximum to minimum and viceversa,
several times in an hour. When using the ECO PLUS function,
the maximum temperature setting is 79°F (26°C). To activate
this function, press the ECO PLUS button (D).
Swivel button
If you want the appliance to distribute the airow over
a larger area, press the oscillation button (C) . The
appliance will then oscillate right and left.
To stop the oscillation in the desired position, just press
oscillation button (C) again.
Turn the appliance o
To turn o the appliance press button ON/OFF (A). The
display could show the count down for about 6 seconds. To
completely turn o the appliance, remove the plug from the
socket.
Please note: The display can show the temperature in
both °F and °C.
To change the temperature scale, press and hold the + key
for few seconds, then release. Please be informed that as this
is not a precision device, the showed temperature not neces-
sary corresponds to the real one.
24HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on: with the appliance in the STAND-BY
position, press the timer button (E) .
The display shows the symbol and the time remaining
before switch-on. To set the timer, use the + and - adjustment
buttons (B), then wait a few seconds for the programming to
be set. The display returns to show for stand-by and the
symbol to indicate you have set the timer.
When the programmed time has been reached, the appliance
turns on with the same settings it had during the previous
operation.
Delayed shut-o: With the appliance on, press the timer
button (E) . The display shows the symbol and the
time remaining before shut-o. To set the timer, use the +
and – adjustment buttons (B), then wait a few seconds for
the programming to be set. The display returns to show the
current settings and the symbol to indicate you have set
the timer. When the programmed time as been reached the
appliance shuts o automatically. If you want to go back to
operation without the timer, press the timer button (E) twice.
The timer symbol disappears from the display.
ADDITIONAL SAFETY FEATURES
- Overheating protection: a safety device switches the
heater o if it accidentally overheats (e.g.: air intake
and outlet grilles obstructed, lter clogged). In this
case remove the plug from the power outlet and leave
it unplugged for a few minutes, eliminate the cause of
overheating, then plug the fan heater back and turn it
on again. If the appliance doesn't work please contact
the De'Longhi Customer Service.
Please note: To avoid overheating the appliance, do
not cover it.
- Tip over safety switch: a safety tip-over switch turns
the heater o if it tips over or is positioned in an improp-
er way that could jeopardize safety. The appliance emits
a beep and the display will show a blinking dot. After
the appliance has been restored in the vertical position
it will take just few seconds to start on again.