ESPRESSO/CAPPUCCINO MACHINE MACHINE A CAFE CAFETERA ELÉCTRICA Owner’s instructions Mode d’emploi Instrucciones para el uso BAR50
1 30 2 1 4 28 3 21 170g 22 29 27 5 23 26 24 6 20 7 8 25 12 11 9 17 13 14 16 15 19 18 10
1 2 3 4 5 6 7 8 9 10 11 170 170g 12 g 170gr MAX 13 14 15
MAX 16 18 17 A 19 21 20 2 B 1 22 23 24 25 5
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • Do not touch hot surfaces. Use handles and knobs. • To protect against fire, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. • Unplug from the outlet when not in use and before cleaning.
Read this instructions manual carefully before installing and using the device. Only by doing so will you be able to obtain the best results and the maximum safety of use. DESCRIPTION OF THE DEVICE The terminology below will be used throughout the pages that follow. 1. Filter holder for ground coffee 2. Filter holder for prefilled espresso pods (if fitted) 3. Steam boiler cap 4. Lid of milk tank 5. Frother 6. Mixer 7. Milk tank 8. Coffee measuring spoon 9. Anti-spray cover 10. Espresso delivery switch 11.
(fig. 6) and immediately afterwards press the coffee delivery switch (fig. 7). Let the water exit until the “ESPRESSO OK” light goes off; then stop the delivery by pressing the coffee delivery switch again. 4.Empty the cup, wait until the “OK” pilot light comes on again and repeat the whole operation one more time. Use the following directions to prepare the coffee: HOW TO PREPARE ESPRESSO COFFEE WITH THE FILTER HOLDER FOR GROUND COFFEE 1.
bar50 GB 7-11-2000 14:32 Pagina 9 not possible to remove the cap because the threads do not grip. Therefore, to fill the boiler, it is necessary either to wait until all the water in it is used up or until the boiler has cooled. ATTENTION: it is recommended that the boiler be filled when cold and that the measuring container provided be used.
that the hole marked by the B arrow is not plugged. • Once clean, all the parts must be re-assembled in the correct manner. In particular, make sure that the rubber mixer is inserted all the way in and that the red coloured foamer is inserted until a click is heard. If this cleaning is not carried out after every use, the milk foamer may not work properly, the milk may not be aspirated or the milk may drip from the milk tank tube.
PROBLEM Espresso coffee no longer comes out. Espresso coffee drips from the edges of the filter holder, instead of from its holes. PROBABLE CAUSES • Lack of water in the tank. • The holes in the filter holder spouts are plugged. • Fill the water tank. • Clean the holes in the filter holder. • The outlet of the espresso boiler is plugged. • Clean as indicated in the “Cleaning the espresso boiler outlet” section. •The tank is badly inserted and the valve at its bottom is not open.
h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h
