Owner`s manual

Timer On setting: "ON" flashes and
will conceal,numeral segment become
timer-on setting status.Pressing
or could adjust the numeral segment
of time,increase or decrease 1minute per
time within 5 seconds.If you hold pressing
or , the numeral will change
quickly after 2second.The way of the
change is : in the first 2.5 seconds,the
change step is 1 minute.After 2.5seconds,
the change step is 10 minutes.Press this
button within 5 seconds flashing,the
timer setting succeeds. Repress this
button, the timer-on will be canceled.
Before setting the Timer please adjust the
Clock to the current actual time.
７
●
Press this button to set swing angle,
which circularly changes as below:
OFF
If guide louver is stopped when it is
swinging up and down,it will remian
its present position.
indicates guide
louver swings back and forth in all the five
places,as shown in the figure .
SWING UP AND DOWN BUTTON
TIMER ON BUTTON
TIMER OFF BUTTON
●One press this key to enter into TIMER
OFF setup, in which case the TIMER OFF
icon will blink.The method of setting is
the same as for TIMER ON.
●
Remote control
buttons of this control which are not available to this unit will not be described below.
This wireless remote control is universal, and it could be used for many units, some
Names and functions of wireless remote control
Operation of wireless remote control