Datasheet

Delock HDMI Ethernet Extender Set over TCP/IP
Description
This HDMI Extender Set by Delock allows HDMI signals to
be transmitted over a TCP/IP network. The transmitter and
receiver can be connected with a network cable of up to
100 meters. Alternatively both devices can be connected
via a switch, the distance between the HDMI source and
the display device can then be 200 m.
Specification
• Connectors:
1 x RJ45 jack
1 x HDMI-A 19 pin female
1 x DC 5.5 x 2.1 mm female
• Following TCP/IP standard (Broadcasting)
• M-JPEG encoding / decoding up to 1080p / 60 Hz
• Supported resolutions: 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
• Supports EDID und HDCP
• Video bandwidth up to 165 MHz / 1.65 Gb/s
• Optional: simultaneous operation of multiple receivers
• Power consumption: max. 2.5 W
• Dimensions (LxWxH): ca. 103 x 84 x 25 mm
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.5 A
• Output: 5 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm
System requirements
• HDMI cable
• One Cat.5e or Cat.6 network cable
• Switch with VLAN or IGMP Snooping
Package content
• HDMI Extender TCP/IP (sender)
• HDMI Extender TCP/IP (receiver)
• 2 x power supply
• User manual
Item no. 65494
EAN: 4043619654949
Country of origin: China
Package: White Box
© 2017 by Delock . All names and symbols mentioned here are property of the respective producer. Printing errors,
changes and errors excepted.
www.delock.com
65494
1 / 2
21.12.2017