Product Manual

Page 20 of 32

EXIT: This menu option returns the meter to Main Menu.

IR LINK:

This meter option initiates a wireless communication session during which the

currently stored readings will be downloaded to a PC. Before using this feature, the

target PC must be loaded with Delmhorst Instrument Co.’s Universal Application

Program and a Delmhorst base unit must be connected to an available USB port.

•

REQUIREMENTS:

The wireless communication technology employed in the meter requires line-of-sight

access between the red side window of the meter and the receiving window of the

base unit. Simply place the meter and base unit on a flat surface, with the red side

window of the meter facing the receiving window of the base unit. Separation

requirements between the meter and base unit are anywhere from 0 to 12 inches.

•

OPERATION:

1. Begin by starting the Delmhorst Instrument Co. Universal Application

Program (double click the application icon or choose the program from the

Start Menu).

2. Once the TotalCheck and base unit are lined up and the base unit is

connected to a USB port

(a green LED should be lit), select the IR LINK

option in the Main Menu. The meter will display the message “Linking…” for

a few seconds, followed by “Link OK” when successful communication is