Product Manual

Page 16 of 32

1. From the ENHANCED Main Menu, use the   key to highlight RH-T MODE.

Then, press the SELECT key to get into the RH-T mode main menu.

The meter will display the main RH-T mode main menu, as shown below:

2. The meter will begin taking readings. As a default setting the RH reading will be

the most prominent on the screen. If you would like to make another variable

(temperature, GPP/GPK or dew point), the prominent reading, use the   and

  keys to highlight your selection. Press the SELECT key to choose that

variable.

MAIN MENU OPTIONS:

STORAGE:

The Storage Menu groups all meter features related to measurement storage, retrieval

and manipulation. All operations on stored readings may only be performed on a single

job.

1. While in the ENHANCED main menu, use the

  keys to highlight option #4

STORAGE.

2. Press the SELECT key to enter the storage sub menu. There are four available

selections in this menu as shown below:

• View Statistics:

This menu option selects the meter’s statistical analysis option. Selecting this option

gives the user access to two sets of statistical data. A screen shot example of the

first set is shown below: