Product Manual

Page 22 of 30

moves forward through weekdays using the key and backward using the key. The

SELECT (center) key is only active when menu selection is applied to HOURS, DONE or

CANCEL. Selecting DONE exits this screen back to the SETUP MENU and updates the

clock with the newly chosen values. Selecting CANCEL exits this screen back to the SETUP

MENU without updating the clock.

 Set Power Off time: This menu option allows the user to change the amount of time

allowed to lapse between the last key press and meter shut-down. Allowable range is

1min – 9min, with a default value of 2min.

 Set Backlight: This menu option allows the user to change the amount of time allowed to

lapse between the last key press and backlight shutdown. The default setting for this

feature is NO, where the backlight is completely disabled. Backlight shutdown delays are

10, 20, 30 seconds. It is recommended that the backlight delay be set to the minimum

amount of time necessary in order to maximize battery life.

 Conversions: This menu option allows the user to change the temperature scale from

Fahrenheit (default) to Celsius. You can also change the electrode type from 4-pin (or

non-insulated) or 2-pin (insulated.)

NOTE: Except for clock settings, all other parameters will return to their default values,

as indicated above, when the RESTORE DEFAULTS option is selected in the Storage

Menu. The values chosen for the Setup Menu parameters will remain in effect even if the

meter is turned off, and even if the battery is removed.

 SET PIN MODE ALARM

Refer to procedure on page 16.