Product Manual

Page 19 of 30

1. By using the  keys you may select which job and location you wish to view.

After you have made your selection, scroll to DONE and press the SELECT key.

Below are three examples of possible screens at this point:

3. A complete record of information per reading will be displayed. You will be able to

scroll through each reading in a room, using the NEXT key.

 CLEAR MEMORY:

This option will delete all the readings stored in the meter, but will keep the defined job

structures and associated locations and areas in tact.

 RESTORE DEFAULTS:

This will delete all defined parameters and readings stored in the meter. The meter will be

now set to the factory parameters: T = 70°F, Non-insulated probe, Backlight = OFF,

Power-off time = 2 min.

Note: Memory deletion and restoring defaults are both irreversible.

 EXIT:

This menu option returns the meter to MAIN MENU.