Product Manual

Page 18 of 30

At any time, you may modify Temperature (T), location (LOC), or switch to SCAN mode

(GOTO SCAN).

The EXIT option in both SCAN and PIN MODE menus will cancel the measurement

process and will put the meter in the MAIN MENU.

TO TAKE TEMP/RH READINGS IN ENHANCED MODE:

Before entering the RH-T mode, firmly insert the RH/T-S1 sensor into the top of the meter,

making sure to align the pin-out on the DIN connector.

1. From the ENHANCED Main Menu, use the key to highlight RH-T MODE. Then,

press the SELECT key to get into the RH-T mode main menu.

The meter will display the main RH-T mode main menu, as shown below:

2. The meter will begin taking readings.

MAIN MENU OPTIONS:

STORAGE:

1. While in the ENHANCED main menu, use the  keys to highlight option #5

STORAGE.

2. Press the SELECT key to enter the storage sub menu. There are three available selections in

this menu:

 STORED READINGS – choose either Pin readings or Scan readings.