Service Manual

10. Connect the camera cable to the system board and close the latch.
Post-requisites
1. Replace the fans.
2. Replace the heat sink.
3. Replace the battery.
4. Replace the I/O-board interposers.
5. Replace the solid-state drive.
6. Replace the base cover.
Entering the Service Tag in the BIOS setup
program
1. Turn on or restart your computer.
2. Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field.
NOTE: Service tag is the alphanumeric identifier located at the back side of your computer.
Replacing the system board 47