Service Manual

System Configuration
Audio
This field enables or disables the integrated audio controller. By default, the Enable
Audio option is selected. The options are:
Enable microphone (enabled by default)
Enable internal speaker (enabled by default)
Keyboard Illumination
This field lets you choose the operating mode of the keyboard illumination feature.
The keyboard brightness level can be set from 0% to 100%. The options are:
Disabled
Dim
Bright (enabled by default)
Unobtrusive Mode Enable or disable the Fn+F7 key combination to turn off all lights and sound emissions
in the system.
Default: Disabled.
Miscellaneous Devices Enable or disable various onboard devices.
Table 5. System setup options—Video menu
Video
LCD Brightness Set the panel brightness independently for battery or AC power.
EcoPower Enable or disable EcoPower.
Table 6. System setup options—Security menu
Security
Admin Password Set, change, or delete the administrator password.
System Password Set, change, or delete the system password.
Strong Password Enable or disable strong passwords.
Password Configuration Control the minimum and maximum number of characters that are allowed for Admin
and System passwords.
Master Password Lockout Enable to prevent users from entering Setup when a Master Password is set.
Password Bypass Bypass the System (Boot) Password and the internal hard disk password prompts
during a system restart.
Password Changes Enable or disable changes to the system and hard disk passwords when an
administrator password is set.
UEFI Capsule Firmware Updates Enable or disable BIOS updates through UEFI capsule update packages.
TPM 2 Security
This field lets you choose the Trusted Platform Module (TPM) 2.0 Security features.
The options are:
TPM On
PPI Bypass for Enable Commands
PPI Bypass for Disable Commands
SHA-256
Clear
Attestation Enable
Key Storage Enable
Enable or disable the TPM state.
Default: Enabled.
Computrace Enable or disable the BIOS module interface of the optional Computrace Service from
Absolute Software.
40 System setup