Service Manual

Replacing the speakers

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Using the alignment posts on the palm-rest assembly, place the speakers on the palm-rest assembly.

2. Replace the four screws (M2x2) that secure the speakers to the palm-rest assembly.

3. Route the speaker cable on the system board and adhere the tape to the system board.

4. Connect the speaker cable to the system board.

5. Adhere the tape securing the speaker cable to the system board.

Post-requisites

1. Replace the battery.

2. Replace the base cover.

Replacing the speakers 21