Service Manual

Table 4. System setup options—System Configuration menu
System Configuration
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Time Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Storage Interface
Port Enablement Enables the selected onboard drives.
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Drive Information Displays the information of various onboard drives.
Enable Audio Enables or disables all integrated audio controller.
Default: ON.
Enable Microphone Enables or disables microphone.
Default: ON.
Enable Internal Speaker Enables or disables internal speaker.
Default: ON.
USB Configuration
Enable Boot Support Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Default: ON.
Enable External USB Ports Enables or disables USB ports to be functional in an operating system
environment.
Default: ON.
Enable Thunderbolt Technology Support Enables or disables Thunderbolt Technology Support.
Default: ON.
Enable Thunderbolt Boot Support Enables or disables Thunderbolt Boot Support.
Default: OFF.
Miscellaneous Devices Enables or disables various onboard devices.
Enable Camera Enables or disables the camera.
Default: ON.
Touchscreen Enables or disables the touchscreen for the operating system.
NOTE: Touchscreen will always work in the BIOS setup irrespective of this
setting.
Default: ON.
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
Default: ON.
Enable Fingerprint Reader Single Sign On Enables or disables the Fingerprint Reader Device's Single Sign On capability.
Default: ON.
40 System setup