Service Manual

12. Adhere the tapes that secure the display cable and camera cable to the system board.

13. Align and place the display-cable bracket on the system board.

14. Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board.

Next steps

1. Install the battery.

2. Install the base cover.

3. Follow the procedure in After working inside your computer.

Keyboard assembly

Removing the keyboard assembly

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. Remove the battery.

4. Remove the system-board assembly.

About this task

The following images indicate the location of keyboard assembly and provide a visual representation of the removal procedure.

Removing and installing components