Service Manual

Installing the speakers

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of speakers and provides a visual representation of the installation procedure.

Steps

1. Slide the speakers into the slots on the palm-rest assembly.

NOTE: Ensure that there is no adhesive residue from the faulty speakers that are removed previously.

2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.

3. Connect the speaker cable to the system board.

Next steps

1. Install the battery.

2. Install the base cover.

3. Follow the procedure in After working inside your computer.

Removing and installing components