Support Matrix
Table Of Contents
- 1.1 Supported hardware, firmware and software
- 1.2 Supported components
- 1.3 Validated BIOS and iDRAC versions
- 1.4 Supported physical disk drives
- 1.5 Supported HBAs
- 1.6 Supported networking
- 1.7 Supported hardware management solutions
- 1.8 Supported Nutanix AOS software
- 1.9 Supported hypervisor OS
- 1.10 Driver support
- 2 Technical specifications
- 3 Documentation matrix
- 4 Contacting Dell EMC
- 5 Quick Resource Locator
Introduction
5 Dell EMC XC730xd-12C Series Hyper-Converged Appliance Support Matrix | A26
Introduction
This document provides information about the supported software, firmware, and hardware versions and
technical specifications for the Dell EMC XC730xd-12C Series Hyper-Converged Appliance.
NOTE: Future updates to this document may remove firmware versions because Nutanix LCM is the
prescribed method to update the appliance.
NOTE: This Support Matrix contains the latest compatibility and interoperability information. If you observe
inconsistencies between this information and other documentation or references, this document supersedes
all other documentation.
1.1 Supported hardware, firmware and software
This chapter provides information about supported software, firmware, and hardware versions for the Dell
EMC XC730xd-12C Series Hyper-Converged Appliance.
1.2 Supported components
This section provides information about components supported by your hardware.
Supported Components
Component
v3 Version
v4 Version
CPUs
E5-2620 v3
E5-2620 v4
BIOS
1.2.5 or later
2.7.1 or later
iDRAC support
2.02.02.01 or later
2.52.52.52 or later
1.3 Validated BIOS and iDRAC versions
Update BIOS and iDRAC using Nutanix LCM. This reference provides the qualified versions of BIOS and
iDRAC. These components should be paired. For manual update, the latest version or its predecessor is
recommended. This should be a uniform update cluster wide.
Validated BIOS and iDRAC versions
BIOS
iDRAC
2.11.0
2.75.75.75
2.9.1
2.70.70.70