Support Matrix
Table Of Contents
- 1.1 Supported hardware, firmware and software
- 1.2 Supported components
- 1.3 Validated BIOS and iDRAC versions
- 1.4 Supported physical disk drives
- 1.5 Supported HBAs
- 1.6 Supported networking
- 1.7 Supported hardware management solutions
- 1.8 Supported Nutanix AOS software
- 1.9 Supported hypervisor OS
- 1.10 Driver support
- 2 Technical specifications
- 3 Documentation matrix
- 4 Contacting Dell EMC
- 5 Quick Resource Locator
Technical specifications
11 Dell EMC XC730xd-12C Series Hyper-Converged Appliance Support Matrix | A26
2 Technical specifications
This chapter provides technical specifications for appliance.
2.1 Physical specifications
This section provides expansion physical specifications for storage, including height, width, depth, maximum
configuration weight and empty weight.
Physical specifications
Physical
Specification
Height
8.73 cm (3.44 inch)
Width
48.2 cm (18.98 inch)
Depth
75.58 cm (29.75 inch)
Weight (Maximum)
36.5 kg (80.47 lb.) (3.5-inch hard drive systems)
Weight (Empty)
23.2 kg (51.15 lb.) (3.5-inch hard drive systems)
2.2 Processor specifications
This section provides processor specifications required for your hardware.
Processor specifications
Type
Specification
One Intel Xeon processor
EP E5-2600 v3 and v4 product family
2.3 Expansion bus specifications
This section provides expansion bus specifications for storage, including bus type, expansion cards, and
expansion slots.
Expansion bus specifications
Expansion Bus
Specification
Bus type
PCI Express Generation 3
Expansion Cards
For a list of supported expansion cards, refer to
the Owner's Manual at
Dell.com/xcseriesmanuals.
Expansion slots using riser card
Riser 2
(Slot 5) One full-height, full-length x8 link
Riser 3
(Slot 6) One full-height, full-length x8 link