Reference Guide

• Documentation
Dell Nautilus
Dell Nautilus is a general maintenance release utility for updating rmware for SAS and SATA drives (or disks).
For information about the supported Dell Nautilus version number, see the Supported hardware, rmware, and software section in this
document.
To download the Dell Nautilus Firmware Update Utility for SAS and SATA disk Solid State Drives (SSDs):
1 Go to Dell.com/support/drivers.
2 Under the Customized support section, in the Enter your Service Tag or Express Service Code box, type the Service Tag of your
Dell
XC730-16G, and then click Submit.
NOTE: If you do not have a Service Tag, select Detect My Product to allow the system to automatically detect your
Service Tag, or select Choose from a list of all Dell products to select your product from the Product Selection page.
3 On the Product Support page, click Drivers & downloads.
4 From the Operating System drop-down menu, select Not Applicable.
5 Go to the SAS Drive section.
6 Search for Dell Nautilus Firmware Utility for SAS and SATA disk and SSDs.
7 Click Download. Click Download again to download the .exe le. In your Download folder, locate the latest version of Dell Nautilus and
click to expand the compressed les.
8 In the extracted folder, run the USBMake Utility.
9 Create the bootable Nautilus package and perform one of the following tasks:
• To create a bootable CD or DVD image (ISO), click Create Bootable CD Image and follow instructions. Burn the .iso image le to
CD or save the bootable ISO on a management workstation.
• Connect a USB ash drive to the system and follow instructions to create a bootable USB ash drive.
Downloading and installing Software applications
15