Owners Manual

a. Loosen one of the screws that secure the heat sink to the system board.

Wait 30 seconds for the heat sink to loosen from the processor.

b. Remove the screw diagonally opposite the screw you first removed.

c. Repeat the procedure for the remaining two screws.

d. Remove the heat sink.

Figure 18. Removing and installing a processor

1. heat sink 2. captive screws (4)

3. processor socket 4. slots (4)

Figure 19. Removing and installing a processor heat sink

1. captive screw (4) 2. heat sink

3. processor socket 4. slot (4)