Owners Manual

Figure 12. Removing and installing a cooling fan

1. cooling-fan assembly 2. cooling-fan connector (6)

3. fan release tab (6) 4. cooling fan (6)

5. cooling-fan connector on system board

(6)

Next steps

1. Replace the cooling fan. See Installing a cooling fan.

2. Follow the procedure listed in After working inside your system.

Installing a cooling fan

Prerequisites

1. Ensure that you read the Safety instructions.

2. Follow the procedure listed in Before working inside your system.

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that are shipped with your product.

Steps

1. Align the plug at the base of the cooling fan with the connector on the system board.

2. Slide the cooling fan into the securing slots until the tabs lock into place.

Next steps

Follow the procedure listed in After working inside your system.