Owners Manual

3. Hard drive

NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator

(on the right side) does not function and remains off.

Table 4. Hard drive indicators

Drive-status indicator pattern Condition

Blinks green two times per second Identifying drive or preparing for removal. HDD or SSD

location is enabled for one or more HDDs or SSDs is in

the failed state on the Nutanix Web GUI.

Blinks amber four times per second Drive failed

Steady green Drive online

iDRAC Direct LED indicator codes

This topic describes about the iDRAC Direct LED indicator codes.

NOTE: The iDRAC Direct LED indicator does not glow for the USB mode.

Figure 3. iDRAC Direct LED indicator

1. iDRAC Direct status indicator

The following table displays iDRAC Direct activity when configuring iDRAC Direct by using the

management port (USB XML Import).

Table 5. iDRAC Direct by using the management port (USB XML Import).

Convention iDRAC Direct

LED indicator

pattern

Condition

A Green Glows green for a minimum of two seconds at the beginning and

end of a file transfer.

B Flashing green Indicates file transfer or any operation tasks.