Owners Manual

安装控制面板
小心: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed
by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that
came with the product.
1. 如果已安装前挡板，请将其卸下。
2.
关闭系统，包括所有已连接的外围设备，并断开系统与电源插座和外围设备的连接。
3. 卸下系统护盖。
4. 围绕电缆折叠标签。
5. 折叠靠近连接器的推拉卡舌，并将连接器和推拉卡舌导入通道中。
6. 推拉电缆直至其完全通过该通道。
7. 拧紧这三颗 Torx 螺钉以将控制面板固定到机箱上。
注: 您必须正确布置电缆以免其被夹住或卷曲。
8. 通过推拉连接器中心将电缆连接器连接到背板上。
9. 安装系统护盖。
10. 将系统重新连接至电源插座，并开启系统和所有已连接的外围设备的电源。
11. 请安装前挡板（如果适用）。
卸下 I/O 面板
小心: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed
by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that
came with the product.
1. 如果已安装前挡板，请将其卸下。
2. 关闭系统，包括所有已连接的外围设备，并断开系统与电源插座和外围设备的连接。
3. 卸下系统护盖。
小心: 为防止损坏 I/O 电缆，从 HDD 或 SSD 背板上的连接器卸下或安装 I/O 电缆之前必须先释放锁
定卡舌。
4. 顺时针旋转 I/O 电缆连接器上的锁定卡舌 90 度以释放锁。
5. 从背板断开 I/O 电缆的连接。
6. 卸下将 I/O 面板固定到机箱的三颗 Torx 螺钉。
7. 经过机箱上的通道拉出 I/O 面板电缆。
83