Support Matrix

Supported hardware, firmware, and software
7 Dell EMC XC6320 Series Hyper-Converged Appliance Support Matrix | A23
Form Factor
Capacity
Type
Vendor
2.5"
200 GB
SAS SSD
HGST
2.5"
400 GB
SAS SSD
HGST
2.5"
800 GB
SAS SSD
HGST
2.5"
800 GB
SED SAS SSD
HGST
2.5"
1600 GB
SED SAS SSD
HGST
2.5"
480 GB
SATA SSD
Samsung
2.5"
960 GB
SATA SSD
Samsung
2.5"
1920 GB
SATA SSD
Samsung
2.5"
3840 GB
SAS SSD
Toshiba
2.5"
1.92 TB
SED SAS SSD
Toshiba
2.5"
480 GB
SATA SSD
Intel
2.5"
960 GB
SATA SSD
Intel
2.5"
1920 GB
SATA SSD
Intel
2.5”
3840 GB
SATA SSD
Intel
1.4 Supported HBAs
This section provides information about Host Bus Adapters (HBA) supported by your hardware.
Supported HBAs
Name Form factor/Slot
Minimum firmware
version
Build Number
LSI 2008 SAS
mezzanine card
Integrated slot
20.00.03
0.94 supports 6
Gb/s drives
0.95 supports 12
Gb/s drives
1.5 Supported networking
This section provides information about networking supported by your hardware and supported NICs.
Intel branded Network Daughter Cards (NDC) and Network Interface Cards (NIC) specify the use of only Intel
branded SFP+ optical modules for use with optical cables. When ordering a system with optics, the
appropriate Intel branded SFP+ optical modules are included with your order. If you already have SFP+
optical modules, ensure they are the Intel branded modules before inserting into the NDC or NIC. Twinax
cables are the supported network cables for Intel NDC and NIC.
CAUTION: Using any brand of SFP+ module other than Intel during deployment disables the 10 GbE ports.
Call Dell EMC Support to recover port functionality.