Owners Manual

Table 3. Back panel features and indicators
Item Indicator, button, or
connector
Icon Description
1 PSU 2 1600 W AC PSUs.
2 PSU 1 1600 W AC PSUs.
3 USB port Enables you to connect USB
devices to the system. The
ports are USB 3.0-compliant.
4 Ethernet connector 10G NIC 1 connector.
5 Ethernet connector 10G NIC 2 connector.
6 Management port Dedicated management port.
7 USB to serial port Connects the system to a host.
8 VGA port Connects a VGA display to the
system.
9 Power button/power and
system LED
The power-on indicator glows
green when the system power
is on.
The power-on indicator turns
amber when the system critical
event occurs.
The power button controls the
DC PSU output to the system.
NOTE: When turning on
the system, the video
monitor can take from
several seconds to over
two minutes to display an
image, on the basis of the
disk space available in the
system.
NOTE: On ACPI-
compliant operating
systems, turning off the
system by using the
power button causes the
system to perform a
graceful shutdown before
the system is turned off.
11