Users Guide

9 Fabric Manager for XC Xpress User’s Guide | A02
Figure 4 Sample report message.
Table 2 Report messages definition
Term
Definition
Switch Model
Displays the switch type, model and the current operating system version on the switch.
If your switch is not a validated switch by Fabric Manager, manually verify you have
the items in section 1.3. If that fails, contact your Dell sales representative to purchase
the proper switch.
Switch Type
Specifies whether the switch is capable of 1 G, 10 G or 40 G. XC deployment requires a
minimum of 1 G. If the switch does not supports the minimum, then the test results fail.
IPv4
If the switch is IPv4 capable, the test results pass. If the switch is not IPv4 capable, the
test results fail.
IPv6
If the switch is IPv6 capable, the test results pass. If the switch is not IPv6 capable, the
test results fail.
VLAN
Displays the VLAN capability and configured VLANs on the switch. If the switch is
capable of VLAN, the test results pass, otherwise results fail.
IP Subnet
The tool reports all the configured interfaces as “Ports in use.” These ports are not
available for connecting XC cluster nodes.