Owners Manual

Figure 35. Removing the system battery

1 system battery 2 system battery slot

3 To install a new system battery, hold the battery with the "+" facing up and slide it under the securing tabs.

4 Press the battery into the connector until it snaps into place.

Figure 36. Installing the system battery

system battery 2 system battery slot

Next steps

1 Install the cooling shroud.

2 If removed, install the expansion card riser.

3 Follow the procedure listed in the After working inside your system section.

4 While booting, press F2 to enter System Setup and ensure that the battery is operating properly.

5 Enter the correct time and date in the System Setup Time and Date elds.

6 Exit System Setup.