Owners Manual

2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system
Installing the internal SD module
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Locate the internal SD module (ISDM) connector on the system board.
2 Align the ISDM with the connector on the system board.
3 Push the ISDM until it is rmly seated on the system board.
Figure 32. Installing the internal SD module
Installing and removing system components
51