Owners Manual
Related links
Safety instructions
Before working inside your system
Removing the expansion card riser
Installing the expansion card riser
After working inside your system
iDRAC port card
The iDRAC port card consists of the SD vFlash card slot and an iDRAC port. The iDRAC port card features a dedicated NIC port and is
used for remote, advanced management of the system through the network.
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-
demand local storage and a custom deployment environment that enables automation of server conguration, scripts, and imaging. It
emulates a USB device. For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
Internal SD module
You can congure the Internal SD module (ISDM) for storage or as the OS boot partition. The ISDM card supports single card operation
without redundancy.
Removing the internal SD module
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Locate the Internal SD Module (ISDM) on the system board.
2 If installed, remove the SD cards.
3 Hold the plastic pull tab and pull the SD module out of the system board.
Installing and removing system components
49