Owners Manual

Related links
Safety instructions
Before working inside your system
Removing the expansion card riser
Installing an expansion card
Installing the expansion card riser
After working inside your system
Installing an expansion card
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Remove the expansion card riser.
Steps
1 Locate the expansion card connector on the riser.
2 Holding the expansion card by its edges, position the card so that the card connector aligns with the connector on the expansion card
riser.
3 Align the expansion card bracket with the hooks on the chassis.
4 Insert the card connector into the expansion card riser connector until the card is rmly seated.
NOTE
: Ensure that the expansion card is properly seated along the chassis, so that expansion card latch can be closed.
5 If required, connect the cables to the expansion card.
Figure 30. Installing an expansion card into the expansion card riser
1
expansion card riser 2 expansion card riser connector
3 expansion card latch 4 expansion card
Next steps
1 Install the expansion card riser.
2 Follow the procedure listed in the After working inside your system section.
48
Installing and removing system components