Owners Manual

2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the expansion card riser
After working inside your system
Installing the expansion card riser
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Install the expansion card into the expansion card riser.
Steps
1 Align the following:
a Guide on the expansion-card riser with the guide pin on the system board.
b Expansion card riser latch with the slot on the chassis.
2 Lower the expansion card riser until the expansion card riser is rmly seated in the connector on the system board.
3 Close the expansion card riser latch.
Figure 28. Installing the expansion card riser
1
expansion card riser 2 guide on the expansion card riser
3 guide pin on the system board 4 riser connector on the system board
5 slot on the chassis 6 expansion card latch
Next steps
Follow the procedure listed in the After working inside your system section.
46
Installing and removing system components