Owners Manual

Steps

1 Unplug the power cable from the SATADOM Tape Backup Unit (TBU) power connector.

2 Press the lock release on the SATADOM, and pull it up and away from the system.

NOTE: After removing the SATADOM, place it in an anti-static container for reuse, return, or temporary storage.

NOTE: Dell EMC recommends that you do not modify the SATADOM Read/Write default setting.

Figure 19. Removing and installing SATADOM

SATADOM 2 SATA connector

3 power cable 4 power adapter

5 SATADOM TBU power connector

Next steps

Follow the procedure listed in the After working inside your system section.