Owners Manual

Before working inside your system
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Turn o the system, including any attached peripherals.
2 Disconnect the system from the electrical outlet and disconnect the peripherals.
3 If installed, remove the front bezel.
4 If applicable, remove the system from the rack.
For more information, see the Rack Installation placemat at Dell.com/poweredgemanuals.
5 Remove the system cover.
Related links
Safety instructions
Removing the optional front bezel
Removing the system cover
After working inside your system
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Install the system cover.
2 If applicable, install the system into the rack.
For more information, see the Rack Installation placemat at Dell.com/poweredgemanuals.
3 If removed, install the front bezel.
4 Reconnect the peripherals and connect the system to the electrical outlet.
5 Turn on the system, including any attached peripherals.
Related links
Safety instructions
Installing the optional front bezel
Installing the system cover
Recommended tools
You need the following tools to perform the removal and installation procedures:
• Key to the bezel lock.
The key is needed only if your system includes a bezel.
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• Plastic scribe
• Wrist grounding strap
22
Installing and removing system components