Deployment Guide

41 Dell EMC XC Xpress Hyper-Converged Appliance Deployment Guide for ESXi | A02
Example of a log showing when a cluster does not create successfully.
3. Call Dell EMC Technical Support.
Warning: This process should not be done on production systems. Any data on the appliance will be
destroyed and is not recoverable. Factory reset resets the system to the state it was when it left the factory.
B.4 Unable to connect external networks/sites including websites, or
PULSE
1. Verify HTTP proxy is configured in Prism. Prism is a Nutanix based software where you centrally
manage your infrastructure. For more information on managing your HTTP proxy see section “Setting
up the HTTP proxy in Prism” in the Dell EMC XC430 Xpress Deployment Guide.
2. Verify DNS (Name Server) is configured in Prism. For more information, see section, “Setting up the
name Server (DNS) in Prism,” in the Dell EMC XC430 Xpress Deployment Guide.
B.5 Why can’t I discover my appliances?
Reasons you cannot discover appliances include but not limited to the following:
 IPv6 not enabled on management station
 Firewall on management workstation blocking ports
 Switch is filtering the ports
 Management station on a different VLAN or subnet than appliances
Make sure you open the ports. Verify HTTP proxy is configured in Nutanix Prism. For more information on
managing your HTTP proxy see section “Setting up the HTTP proxy in Prism.”