Deployment Guide

35 Dell EMC XC Xpress Hyper-Converged Appliance Deployment Guide for ESXi | A02
A.5 Important information about SATADOM
The SATA Disk‐On‐Motherboard (SATADOM) shipped with XC Xpress Series appliances is intended as an
appliance boot device.
Note: Write intensive activities and processes leveraged by XC Xpress appliances, are designed to take
place on the SSDs and HDDs and not the boot device. The hypervisor boot device is not designed for
application use.
Warning: Adding additional write intensive software to the SATADOM boot disk results in heavy wear on the
device beyond design specifications resulting in premature hardware failure.
A.6 Setting up the HTTP proxy in Prism
The HTTP proxy is required for PULSE and it is also required for external connections.
1. Log in to Prism.
2. Click the Gear icon.
3. Select HTTP Proxy.
4. Select New Proxy. Fill out the required information.
Note: Username and password are only require if the proxy server requires it.
5. Click Save.