Deployment Guide

25 Dell EMC XC Xpress Hyper-Converged Appliance Deployment Guide for ESXi | A02
6.6 Creating a cluster
The imaging process is shown under Cluster Creation Status on the Cluster Creation progress screen.
Observe the image process under Cluster Creation Status.
This process takes approximately 15 minutes depending on the configuration. Use the log link to monitor the
cluster creation progress.
After completion, you are presented with the following screen:
Cluster creation successful screen.
1. On the Create Cluster screen, click Prism, and a new web browser launches.
2. If cluster creations fails, see the Troubleshooting section prior to contacting Dell EMC support.