Deployment Guide

22 Dell EMC XC Xpress Hyper-Converged Appliance Deployment Guide for ESXi | A02
6.4 Setting up the appliance
Node Setup screen.
1. On the Node Setup page, manually enter the IP addresses and hostnames for each appliance.
2. Click Validate Network.
3. If network validation fails, check to see if you have duplicate IP addresses. Correct any errors and
click Validate Network again.
6.5 Selecting images
1. On the Selecting Imaging Type dialog box, click Single Hypervisor.
Note: The Multi Hypervisor option is not supported on Xpress.