Owners Manual

2. Follow the procedure listed in Before working inside your system..

Steps

1. Locate the internal dual SD module on the system board.

2. If installed, remove the SD cards.

3. Hold the plastic pull tab and pull the dual SD module out of the system board.

Figure 19. Removing and installing the Internal Dual SD Module (IDSDM)

1. Internal Dual SD module 2. LED status indicator (2)

3. SD card 4. SD card slot 2

5. SD card slot 1 6. IDSDM connector

Table 16. IDSDM indicator codes

Convention IDSDM indicator code Description

A Green Indicates that the card is online

B Flashing green Indicates rebuild or activity