Owners Manual

Drive-status indicator pattern Condition

Blinks amber four times per second Drive failed

Blinks green slowly Drive rebuilding

Steady green Drive online

Blinks green three seconds, amber three seconds,

and turns off six seconds

Rebuild aborted

iDRAC Direct LED indicator codes

This topic describes about the iDRAC Direct LED indicator codes.

NOTE: The iDRAC Direct LED indicator does not glow for the USB mode.

Figure 4. iDRAC Direct LED indicator

1. iDRAC Direct status indicator

The following table displays iDRAC Direct activity when configuring iDRAC Direct by using the

management port (USB XML Import).

Table 6. iDRAC Direct by using the management port (USB XML Import).

Convention iDRAC Direct

LED indicator

pattern

Condition

A Green Glows green for a minimum of two seconds at the beginning and

end of a file transfer.

B Flashing green Indicates file transfer or any operation tasks.

C Green and turns

off

Indicates that the file transfer is complete.

D Not lit Indicates that the USB is ready to be removed or that a task is

complete.