Support Matrix

Supported hardware, firmware, and software
6 Dell EMC XC430 Series Hyper-Converged Appliance Support Matrix | A28
1 Supported hardware, firmware, and software
This chapter provides information about supported software, firmware, and hardware versions for the Dell
XC430 Series Hyper-Converged Appliance.
NOTE: Future updates to this document may remove firmware versions because Nutanix LCM is the prescribed method
to update the appliance.
1.1 Supported components
Supported components
Component
v3 Version
v4 Version
CPUs
E5-2620 v3
E5-2620 v4
E5-2630 v3
E5-2630 v4
E5-2650 v3
E5-2643 v4
E5-2660 v3
E5-2650 v4
E5-2680 v3
E5-2660 v4
E5-2595 v3
E5-2680 v4
E5-2690 v4
E5-2595 v4
E5-2598 v4
BIOS
1.2.6 and later
2.7.1 or later
iDRAC support
2.15.10.10 or later
2.52.52.52 or later
1.2 Validated BIOS and iDRAC versions
Update BIOS and iDRAC using Nutanix LCM. This reference provides the qualified versions of BIOS and
iDRAC. These components should be paired. For manual update, the latest version or its predecessor is
recommended. This should be a uniform update cluster wide.
Validated BIOS and iDRAC versions
BIOS
iDRAC
2.11.0
2.75.75.75
2.9.1
2.70.70.70
1.3 Supported physical disk drives
This section provides information about disks drives supported by your hardware.
Supported physical disk drives
Form Factor
Capacity
Type
Vendor
3.5"
4 TB
NL-SAS HDD
Dell Supported
3.5"
6 TB
NL-SAS HDD
Dell Supported