Manual

Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Push the power-button module tabs into the slots on the front panel until
the module snaps in place.
2 Route the power-button module cable through the routing guides on the
chassis.
3 Connect the power-button module cable to the system board.
For more information, see “System-board components”.
Post-requisites
1 Replace the top cover.
2 Replace the front bezel.
3 Replace the computer cover.
83